Shape, size and the powder particles are important parameters which affect the properties filtering degree of PLASTIC AIR SILENCER.
DALON SILENCERS are produced by sintering technique. The powder is filled into moldings and then sintered inside of them.
Sintering is the processing step for all Powder metallurgy products, its bonding of powder particles
through fusion at temperatures well below the melting point. The structure of PLASTIC AIR SILENCER, after sintering, shows that the grain boundaries run over the original particle boundaries. Sintering gives the high porosity material its shape-stability and properties of a strong metal component.
Properties and application examples
DALON PLASTIC AIR SILENCER could be used with air powered tools, valves, and cylinders to reduce noise and filtering exhaust fumes.
For purpose of reduce noise, filtration, and flow ratings , please selecting DALON mufflers, breather vents, and filters in below ways:
Noise Measured in decibels (dB), the rating indicates how much PLASTIC AIR SILENCER reduces exhaust noise from your tool or equipment. Usually recommends hearing protection for exposure higher than 80 dB.
Filtration: PLASTIC AIR SILENCER trap particles to clean the air exhausting to the environment or going into your equipment. The size of particles is measured in microns; the lower the number of microns, the smaller the particles that are removed from the air.
Flow—Measured in standard cubic meter per minute, this rating is the maximum air flow that a product can withstand.
Please Note to choose the correct pipe size, measure the threaded inside diameter (ID) or outside diameter (OD) of your pipe or valve, usually DALON can offer PLASTIC AIR SILENCER types in standard threading from 1/8 to 1 inch. PLASTIC AIR SILENCER with pipe connections thread into NPT or metric threaded exhaust ports.
←Previous: Plastic Pneumatic Muffler
Next: No Information→